KP2 "Stubby" Solid Waste Compactor

designed to do big jobs in small spaces

KP2 "Stubby"

When you're in a tight spot, turn to the K-PAC stationary "Stubby" Compactor. The KP2 Series is affectionately called "The Stubby". Its design is a K-PAC engineering masterpiece. Other manufacturers have tried to match its space saving features with it's powerful compaction, but nothing comes close.

The K-PAC stationary compactor KP2 "Stubby" allows for compactor installations where room is a premium. Add to this a lower cost of dock installations by eliminating the need for costly walk-on or drive-on decks and the fact that you can eliminate employees from walking on top of a machine that could be wet and slick. You can provide a safer more efficient installation.

Through-the-wall installation costs are also reduced thanks to the shorter feed chutes which require less installation materials. Special Orkot wear blocks on the four cast iron guide shoes of the packer blade provide a longer wear life, reducing expensive floor and wall repair costs. The "Stubby" is ideal for all your waste compaction applications.

The "Stubby" with an overall length of 71" features a guided and supported ram combined with a .38" AR plate floor. This combination along with the K-PAC "NOSHOK" system provides the strongest compactor structurally and the most efficient and trouble free system hydraulically. This combination of features is unique to the industry.

K-PAC "Stubby" compactors are manufactured in fixtures to insure concentric and consistent equipment every time. A superior paint finish is applied using a modified acrylic enamel with high UV protection. After application the paint is baked on to insure proper cure for exceptional durability. A clear chamber opening of 41" x 57" will handle most individual needs. A full 13" of ram penetration with built in breaker bar teeth provide compaction exceeding competitive models.

 

  • KP2HT Specifications
  • Standard Power Pack
  • Models and Dimensions
KP2 Specifications
Ram Top .38 Plate
Ram Face .25 Plate
Floor .38 AR Plate
Clear Top Opening 41" x 57"
Ram Penetration 13"
Packing Force Normal 46,800 lbs.
Packing Force Max. 51,150 lbs.
Packing Pressure Normal 2,150 PSI
Packing Pressure Max. 2,350 PSI
Compactor Sides .25 Plate
Standard Power Pack
Power Pack 10 HP TEFC 3 Phase 230/460 Volt 60 Hertz
Hydraulic Pump 12 GPM
Reservoir 20 Gallons
Cylinders 2 - 4.0" x 37"
Cycle Time 34 Seconds
Model
Capacity
A
B
C
D
E
F
G
H
I
J
K
L
M
Weight1
KP2HT20
2 y³
76"
69.75"
41"
57"
63"
67.1875"
80"
71"
37"
51.5"
31.5"
14.5"
45"
3,675 lbs.

 

1 Approximate Shipping Weight with Power Pack

KP2HT Dimensions

Standard Features

  • 10 HP TEFC 3 Phase 208-230-460
  • Key Switch, Start & Stop Buttons
  • Electrical interlock system prevents operator injury
  • Exclusive 41” x 67.5” feed opening for larger items
  • Hi-Def Plasma-cut for tighter tolerances
  • Multi-cycle timer and 80% light
  • Head sub-floor allows liquids and sludge to return to the compactor container
  • Charge chamber floor is AR plate
  • Baffled reservoir reduces heat in the oil and increases pump longevity
  • Exclusive bolt and pin system on wheels for reduced repair costs
  • 9 5/8” wheels for better support and stability
  • Multi-weight Talamar Extreme®
  • One year parts and labor warranty
  • “Center” wheels for a better seal*
  • Meets all ANSI Z245.2 standards
  • UL listed control panel

Optional Features

  • 20 to 33 Cubic Yard Capacity
  • Splash Pan Optional Design
  • 100% Light
  • Oil Heater / Oil Level Switch
  • Door Auto Start
  • Pressure Gauge
  • Remote Control
  • Cut-Off Valve
  • Energy-Saver 5 HP Motor
  • Bio-Degradable Hydraulic Fluid