Mammoth™ Front Loader

From its one piece body sides, the front loading Mammoth packs it all with superior strength and appearance. Equipped with strongest steel specs in the industry, heavy duty arms and torque tube assembly, the New Way Mammoth is stomping the industry with brute force.
The Mammoth Frontloader

 

  • General Specs
  • Hydraulic Cylinder Specs
  • Chassis Minimum Requirements
General Specifications (standard)
Model
34
40
Body Capacity
34 yd
40 yd
Hopper Capacity
12 yd³
12 yd³
Body Width (inside)
90"
90"
Body Width (outside)
102"
102"
Body Length Overall (A)
403"
444"
Body Length Arms Down (B)
(tailgate raised)
333"
369"
Body Height Arms Down (C)
111"
111"
Body Height Tailgate Raised
144"
144"
Body Height Arms Stowed
119.75"
119.75"
Body Length (D)
257"
293"
Trough (Y/N)
N
N
Available Side Cleanouts (Y/N)
Y
Y
Approx. Body Weight *
 (Empty & Exclusive of Options)
16,100 lbs.
18,300 lbs.
Hydraulic Cylinder Specifications (standard)
Model
34
40
Pack Cylinders 3-Stage (2)
6.5"
6.5"
Arm Cylinder (2)
5" Bore, 36" Stroke, 2-1/2" Rod
5" Bore, 36" Stroke, 2-1/2" Rod
Fork Cylinder (2)
3 1/2" Bore, 24" Stroke, 1-1/2" Rod
3 1/2" Bore, 24" Stroke, 1-1/2" Rod
Hopper Cover Cylinder
2.5"
3"
Tailgate Cylinder (2)
3" Bore, 33.75" Stroke, 1-1/2" Rod
3" Bore, 33.75" Stroke, 1-1/2" Rod
Roof Door (1)
2 1/2" Bore, 80" Stroke, 1-1/4" Rod
2 1/2" Bore, 80" Stroke, 1-1/4" Rod
Ejection Panel (2)
34yd-6 1/2" 3 Stage, 150"
40-43yd-6-1/2" 3 Stage, 182"
Body Lift
N/A
N/A
Chassis Minimum Requirements (standard)
Model
34
40
Wheelbase
172-174"
172-174"
Cab to Trunion
172-174"
208-210"
Front Axle
20,000 lbs.
20,000 lbs.
Rear Axle
36,000 lbs.
44,000 lbs.
Total GVWR
56,000 lbs.
64,000 lbs.

‡ - Length measured depends on options ordered
* - Approximate Body Weight empty and exclusive of options
** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)

Mammoth Technical Drawing

Mammoth Body Construction


Body Specs
Body Sides 3/16" AR235
Body Roof 3/16" A572 GR 50
Body Floor 3/16" AR235
Floor Braces C4 x 5.4# Channel  
Center Deck Formed 3/8" Plate Capping 1/4"x2"x 4" , 1/4" x 4" x 4" A500B, A500B Tube
Mounting Brackets Formed 1/2" A36 Plate A36 Plate
Ejection Panel Tracks Formed 1/4" A36 1/4" x 3" Flat, 1/4" x 2" Flat, 3/8" x 3" Flat A36
Roof 3/16" 50K  
Main Body Rails 1/4" x 3" x 6" A500B Tube
Hopper Sides (lower) 3/16" Hardox 450 AR400 GR
Hopper Sides (upper) 3/16" 50K AR572 GR 50
Hopper Floor 1/4" Hardox 450 AR572 GR 50
Rear Frame (top & sides) 1/4" x 2" x 6" A500B Tube
Rear Frame (lower) 1/4" x 3" x 10" A500B tube
Tailgate Hinge Lugs 1" A36
Access Door 30" x 31" Door Opening  
Upper Body Fill Plate (Transition) 10 Ga. 50K
Upper Body Brush Guards 1/4" A36
Cleanout Capacity 8.60 Gal. Per Side, 17.2 Gal. Total  
Canopy Specs
Length & Width 66" x 83"  
Material 12 Ga. A569 Steel
Roof Door Specs
Roof Size 80" Long x 87" Wide  
Roof Structure 11 Ga. 2"x2" Tube, Formed 1/4" A36 Plate A36 Plate
Roof Cover 10 Ga. 50K Sheet Steel or 10 Ga. Expended Metal  
Roof Door Cyl. Lug 1" A36
Tailgate Specs
Tailgate 10 GA AR235 GR
Tailgate Capacity 2yd³  
Tailgate Inside Height 85 1/2"  
Tailgate Inside Width 89 13/16"  
Tailgate Hopper Bubble 10 Ga. Hardox 450  
Tailgate Sides 10 Ga. 50k  
Tailgate Seal Height 42"  
Tailgate Hinge Lugs 3/4" A36
Ejection Panel Specs
Base & Support Structure 1/4"x2"x3" A500B Tube, 1/4"x3"x3" A500B Tube, 3/8" & 3/16" Plate A36  
Sloped Face Sheet 1/4" AR 235
Bottom Face Sheet 1/4" AR 235
Shoes/Wear Pads 1/4" Tubing With 1/4"x2", 1/4"x3", 3/8"x3" Flat AR 400 Welded To The Shoe  
Cylinder Supports 3/8" A36 Plate With 2 1/2" x 3 1/2" Dom Bushings.  
Cylinder Pin 2 1/2" 1144 Stress Proof  
Bulkhead / Pivot Specs
Base Structure with Pillow Blocks Formed 3/8" A36 Plate, 1/4" x 4" x 6" A500B Tube 1/4" x 2" x 4" A500B Tube With 1/2" A36 Support Plates Through Out Struture  
Pivot Shaft 3 1/2" x 4 1/2" Dom  
Pivot Shaft Length 100"  
Pillow Blocks 3" x 8" x 8 5/8" Split With Split SAE 660 Bronze Bushing  
Arm to Pivot Shaft Lug 1" A36 Plate  
Bulkhead Upright Structure 1/2" x 3" x 6" Angle A36  
Bulkhead Cyl. Support Plates (3) 5/8" A36 Plate  
Bulkhead Ejection Panel Cyl. Bushings 2 1/2" x 3 1/2" Dom  
Bulkhead Ejection Panel Cyl. Pin 2 1/2" 1144 Stress Proof  
Fork Specs
Fork 1 1/4" T1, 1 1/2" T1 (T1=100K)  
Fork Style Hook End Useable Length 45" & 66"  
Fork Style Smooth Useable Length 46" & 72"  
Pivot Shaft 3 1/2" x 4 1/2" 1026 Dom  
Pivot Shaft Length 102"  
Bump Pads (Y/N) Y  
Fork Cyl. Pin 1 1/2" 1144 Stress Proof  
Arm Specs
Arm Sizes 108 1/2" & 111 5/8"  
Arm Skins 1/4" 100k/T1 Std. 3/8" 80k Opt.  
Arm Width and Height with 1/4" Skins 3 1/2" Wide, 11" Tall  
Arm Width and Height with 3/8" Skins 3 3/4" Wide, 11" Tall  
Arm Pivot Shaft 3 1/2" x 4 1/2" 1026 Dom  
Arm Pivot Shaft Length 100"  
Arm Cyl. Pin 2" 1144 Stress Proof  
Arm Cyl. Lug Center Deck 1 1/2" T1  
Arm Plates 8.5 x 1/4" A572 GR 50
Arm Wrap 1" x 2" flat  
Arm Lift Capacity 8,000 lbs.  
Hydraulic System Specs
Operating Pressure 2,500 PSI 12,066 KPA
Pump Flow 55 GPM @1550RPM  
Tank Capacity 70gal with 100 Mesh 141 micron suction strainer 189.3 L
Packing Force 153,000  
Packer Cycle Time 25 seconds  
Loader Arm Cycle 12 seconds  
Hydraulic Hoses 4 to 1 Burst  
Return Filter 10 micron  

Standard Equipment

  • Air Jostick Control
  • Denison Vane Pump
  • Auto-Lock Tailgate
  • All LED Lights
  • Curved Shell Body
  • Sliding Hopper Cover
  • Body Side Ladder
  • 50 Gallon Sump (eject model)
  • Side Access Clean Out Doors and Sump
  • Rear Vision Camera System
  • Automatic Packer
  • Finish Paint - white
  • Mounting
  • Pack on the Go

Optional Equipment

  • Special Lighting
  • Outside Controls
  • 10,000 lbs. Arms
  • Container Disinfectant Sprayer
  • Pressure Line Filter
  • Service Hoist
  • Color Code Paint