Mamba™ Satellite Side Loader

“I just wanted to say how much we enjoy working with your truck...Things have been going fantastic with the truck, and we plan to order another truck within a few months."
Donald J. DeCuollo - Piscataway Township, NJ

PREPARED TO STRIKE ON ANY ROUTE

A Fiercely Fast and Agile Side Loader

The New Way^® Mamba^™ Satellite Side Loader slithers its way into residential routes other garbage trucks can't and provides the freedom to load from either side. With its slender body construction, the Mamba plays a big role and has the ability to transfer compacted materials to larger rear loaders. Available in fixed body mount, the Mamba also features cart tipper and barrel dumper options, giving you the ability to customize a side-loader machine that is sure to strike fear into the competition.

Adaptable

The Mamba slithers into the most difficult routes with the ability to load from either the right or left side.

At Home in Residential Areas

The Mamba's satellite design allows you to keep your truck in the work area by dumping into a large rear loader for transport to the landfill.

Options Available

Customization of the Mamba is available to provide automation for cart tippers.

Contact

Download PDF Flyer

English (Standard)

View Specifications

Standard

Standard Specifications

Click the tabs below to cycle between specifications.

General Specifications

Hydraulic Cylinder Specs

General Specifications
Model	S 600	S 800	S 1000
Body Capacity	6 yd³	8 yd³	10 yd³
Hopper Capacity	1.5 yd³	1.5 yd³	1.5 yd³
Body Width (inside)	94"	94"	94"
Body Width (outside) (A)	94"	94"	94"
Body Length (B)	132"	165"	188"
Body Height (C)	79"	79"	79"
Overall Body Height (tailgate raised)	125"	125"	125"
Approx. Body Weight * (Empty & Exclusive of Options)	4,200 lbs.	5,000 lbs.	5,800 lbs.
Average Compaction	600-800 lb./yd	600-800 lb./yd	600-800 lb./yd

Hydraulic Cylinder Specifications
Model	S 600	S 800	S 1000
Ejection Panel (1) 4-Stage Telescopic	6.5"; 81" Stroke	6.5"; 114" Stroke	6.5"; 138" Stroke
Tailgate Cylinders (2)	2.5"	2.5"	2.5"
Body Lift Cylinders (2)	3.5"	3.5"	3.5"

‡ - Length measured depends on options ordered.

* - Approximate Body Weight empty and exclusive of options.

** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)

Mamba Body Construction Specifications

Click the panels below to expand the desired specifications.

Body Specs

Main Body Rails	C6 x 8.2# Channel
Hopper Floor	All Models - 1/4" GR50 (upper front & lower)	7 Ga. GR50 (upper rear)
Floor Braces	3/16" x 2" x 6"	A500B Tube
Mounting Brackets	Formed 1/4" A36 Plate
Ejection Panel Tracks	C6 x 8.2# Channel
Body Side Walls	Lower 10 Ga.; Upper 12 Ga.	50K; A569
Roof	14 Ga.	A36
Rear Frame Top & Sides	1/4" x 3" x 3"	A500B Tube
Rear Frame Lower	1/4" x 3" x 3"	A500B Tube
Tailgate Hinge Lugs	1/2"	A36
Access Door	11" x 34" Door Size

Tailgate Specs

Tailgate	10 GA	AR235 GR
Tailgate Capacity	1/2yd³
Tailgate Inside Height	84"
Tailgate Inside Width	60"
Tailgate Hopper Bubble	10 Ga. 50K
Tailgate Sides	10 Ga. 50K
Tailgate Seal Height	21"
Tailgate Hinge Lugs	1/2"	A36

Ejection Panel Specs

Base & Support Structure	Formed 1/4"	A36
Bottom Face Sheet	Formed 3/8"	A36 Plate
Shoes/Wear Pads	(2) 1/4" x 5 3/4" x 24"	UHMW
Cylinder Supports	3/4"	A36 Plate
Cylinder Pin	(1) 1/4" I.D. 1144 Stress proof

Hydraulic System Specs

Operating Pressure	1,800 PSI	12,410 KPA
Min. Accept. Oil Flow	17 GPM	64 LPM
Pump Flow	20 GPM	75 LPM
Tank Capacity	24gal with 100 Mesh 141 micron suction strainer	91 L
Packer Cycle Time	19 sec
Hydraulic Hoses	4 to 1 burst
Filter	10 micron
Engine RPM	1,275 - 1,550

Looking for Metric conversions of the specs? View them here →

Metric

Metric Specifications