Sidewinder XTR™Automated Side Loader

Introducing the New Way™ Sidewinder XTR. Join an all-new movement where efficiency is always at your side. New Way™ has squeezed the convenience of automated loading onto an ultra-tough, overbuilt loader. Get ready to take a whole new grip on the industry with the Sidewinder XTR.The Sidewinder XTR

  • XTR Premium Features
  • General Specs
  • Hydraulic Cylinder Specs
  • Chassis Min Requirements
XTR Premium Features

The Industry's
Strongest Arm Design

The industry's proven most durable arm configuration— a frame-mounted arm with a gripper that's in line with the arm— has been reinforced by New Way™ engineers with heavier steel and hardware, giving you the strongest and most dependable side-loader arm ever built. It's built for the abuse of big routes and designed to keep you on the road, day in and day out.

3inch Bore Lift Cylinder
3" Bore Lift Cylinder

In-line Lifting
In-line Lifting

Tough on Trash. Easy On Operators.

All Trucks Need Maintenance
(Ours Just Need Less.)

The Sidewinder™ is rated for a lifespan that keeps you operating with confidence far beyond competitors' models, with significantly lower maintenance costs and minimized downtime. When you do need maintenance, our design enables super-easy access for quicker, less expensive part replacement.

  • More dependability.
    Longer lifespan. Heavier payloads.
    The New Way Sidewinder™ puts your fleet in a position of power. Built for punishment, your crew can keep on operating while other trucks are in the shop. So while this truck is tough, it makes one thing not so tough - the decision to add one to your fleet.
  • Hardox 450 Body and Tailgate Construction
    New Way's advanced grade of high tech AR steel provides superior strength and less weight than traditional steel.
  • Heavy Duty Packer Panel
    Sealed roller bearings and a simplified hydraulic system ensure minimum maintenance and ultimate performance.

The Industry's Strongest Arm Design

Thicker I-Beams
Thicker I-Beams

Larger Outside Bearings
Larger Outside Bearings

Tough on Trash.
Easy On Operators.

The Sidewinder's™ ergonomic in-cab controls are specifically designed for operator comfort. Operator fatigue is decreased while productivity is boosted, putting true power at your fingertips.

Nitro Carbonite Single Cylinder
Nitro Carbonite
Single Cylinder

Easy Access for Maintenance
Easy Access for
Maintenance

Replaceable Rubber Arm Pads
Replaceable Rubber
Arm Pads

Hard Plumbing
Hard Plumbing

  • Huge Compaction Rates
    With the highest ram penetration in the industry, we pack away more and help increase efficiency. Available in 20, 22, 24, 29, and 31y³ capacities.
  • Reinforced Frame-Mounted Arm
    Boasting a 1000lb. capacity at its maximum reach of 12 feet, our arm unit has the highest lift capacity in the industry. Plus,it'll keep you moving with its 6-8 second cycle time.
  • DuPont ELITE Paint
    This paint line has been used by the U.S. Coast Guard for vehicles that regularly endure sal spray conditions. We bake on one of DuPont's toughest paints, providing a finish that's both attractive and highly durable.
General Specifications (standard)
Model
20 YD
22 YD
24 YD
29 YD
31 YD
Body Capacity
20 yd³
22 yd³
24 yd³
29 yd³
31 yd³
Body Width - Outside 
96"
96"
96"
96"
96"
Body Width - Inside
Front: 76 5/8"; Rear: 87"
Front: 76 5/8"; Rear: 87"
Front: 76 5/8"; Rear: 87"
Front: 76 5/8"; Rear: 87"
Front: 76 5/8"; Rear: 87"
Body Length 
237"
237"
247"
287"
297"
Body Length - Tailgate Raised
276"
276"
286"
326"
336"
Body Height 
108"
108"
108"
108"
108"
Body Height - Tailgate Raised
213 1/2"
213 1/2"
213 1/2"
213 1/2"
213 1/2"
Approx. Body Weight *
 (Empty & Exclusive of Options)
11,400 lbs
11,400 lbs
12,000+ lbs
12,000+ lbs
13,000 lbs
Hopper Capacity
6 yd³
6 yd³
6 yd³
6 yd³
6 yd³
Hydraulic Cylinder Specifications (standard)
Model
20 YD
22 YD
24 YD
29 YD
31 YD
Arm Gripper Cylinder
1 1/2" x 5" x 1"
1 1/2" x 5" x 1"
1 1/2" x 5" x 1"
1 1/2" x 5" x 1"
1 1/2" x 5" x 1"
Arm Vertical Lift Cylinder
3" x 16" x 2"
3" x 16" x 2"
3" x 16" x 2"
3" x 16" x 2"
3" x 16" x 2"
Arm Mast Horizontal Cylinder
2" x 54" x 1 1/4"
2" x 54" x 1 1/4"
2" x 54" x 1 1/4"
2" x 54" x 1 1/4"
2" x 54" x 1 1/4"
Tailgate Cylinder
3" x 30" x 2"
3" x 30" x 2"
3" x 30" x 2"
3" x 30" x 2"
3" x 30" x 2"
Packer Panel Cylinder
4 1/2" x 43" x 3"
4 1/2" x 43" x 3"
4 1/2" x 43" x 3"
4 1/2" x 43" x 3"
4 1/2" x 43" x 3"
Body Hoist Cylinder
6 1/2" x 150" 4 Stage
6 1/2" x 150" 4 Stage
6 1/2" x 180" 4 Stage
6 1/2" x 180" 4 Stage
6 1/2" x 180" 4 Stage
Hopper Packer Panel Cover Cylinder
2" x 18" x 1 1/4"
2" x 18" x 1 1/4"
2" x 18" x 1 1/4"
2" x 18" x 1 1/4"
2" x 18" x 1 1/4"
Chassis Minimum Requirements (standard)
Model
20 YD
22 YD
24 YD
29 YD
31 YD
Minimum GVWR **
46,000 lbs.
46,000 lbs.
46,000 lbs.
64,000 lbs.
64,000 lbs.
Recommended Cab
160"
160"
160"
218-226"
218-226"

‡ - Length measured depends on options ordered
* - Approximate Body Weight empty and exclusive of options
** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)

 

Sidewinder XTR Body Construction


Body Specs
  20 YD 22 YD 24 YD 29 YD 31 YD
Main Body Rails 1/4" x 3" x 8" Tube 1/4" x 3" x 8" Tube 1/4" x 3" x 8" Tube 1/4" x 3" x 8" Tube 1/4" x 3" x 8" Tube
Floor 3/16" AR400 3/16" AR400 3/16" AR400 3/16" AR400 3/16" AR400
Ejection Panel Tracks 3/8" x 3" 3/8" x 3" 3/8" x 3" 3/8" x 3" 3/8" x 3"
Side Walls 10 Ga. Hardox 450 10 Ga. Hardox 450 10 Ga. Hardox 450 10 Ga. Hardox 450 10 Ga. Hardox 450
Roof 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K
Rear Frame 7 Ga. 50 K 7 Ga. 50 K 7 Ga. 50 K 7 Ga. 50 K 7 Ga. 50 K
Mid Body Hopper Wall 1/4" AR400 1/4" AR400 1/4" AR400 1/4" AR400 1/4" AR400
Left Side Hoper Wall Upper 10 Ga. 50K, Lower 1/4" AR400 Upper 10 Ga. 50K, Lower 1/4" AR400 Upper 10 Ga. 50K, Lower 1/4" AR400 Upper 10 Ga. 50K, Lower 1/4" AR400 Upper 10 Ga. 50K, Lower 1/4" AR400
Hopper Floor 1/4" AR400 1/4" AR400 1/4" AR400 1/4" AR400 1/4" AR400
Packer Swept Volume 1.8 Yd³ 1.8 Yd³ 1.8 Yd³ 1.8 Yd³ 1.8 Yd³
Hopper Packer Panel Cover 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K
Front Packer Panel Cyl Supports 1/2" 50K 1/2" 50K 1/2" 50K 1/2" 50K 1/2" 50K
Tailgate Specs
  20 YD 22 YD 24 YD 29 YD 31 YD
Capacity 2yd³ 2yd³ 4yd³ 2yd³ 4yd³
Opening Height 92 5/16" 92 5/16" 92 5/16" 92 5/16" 92 5/16"
Width 87" 87" 87" 87" 87"
Tailgate Frame 7 Ga. 50K 7 Ga. 50K 7 Ga. 50K 7 Ga. 50K 7 Ga. 50K
Tailgate Bubble 10 Ga. Hardox 450 10 Ga. Hardox 450 10 Ga. Hardox 450 10 Ga. Hardox 450 10 Ga. Hardox 450
Tailgate Side 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K 10 Ga. 80K
Tailgate Seal Height 30" 30" 30" 30" 30"
Tailgate Hinge Lugs 1 1/4" T1 1 1/4" T1 1 1/4" T1 1 1/4" T1 1 1/4" T1
Arm Specs
  20 YD 22 YD 24 YD 29 YD 31 YD
Arm Reach 144" 144" 144" 144" 144"
Arm Lifting Capacity 1000 lbs. 1000 lbs. 1000 lbs. 1000 lbs. 1000 lbs.
No. Horizontal Mast Bearing 6 6 6 6 6
Arm Cycle Time 6-8 Seconds 6-8 Seconds 6-8 Seconds 6-8 Seconds 6-8 Seconds
Arm Channel Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb
Packer Panel Specs
  20 YD 22 YD 24 YD 29 YD 31 YD
Packer Cycle Time 20s. 20s. 20s. 20s. 20s.
Ram Penetration 8 1/2" 8 1/2" 8 1/2" 8 1/2" 8 1/2"
Ram Compaction Farce 70,000 lbs. @ 2,500 psi 70,000 lbs. @ 2,500 psi 70,000 lbs. @ 2,500 psi 70,000 lbs. @ 2,500 psi 70,000 lbs. @ 2,500 psi
Face Sheet 1/4" AR 400 1/4" AR 400 1/4" AR 400 1/4" AR 400 1/4" AR 400
Cylinder Pin 2" I.D. 1144 Stress Proof 2" I.D. 1144 Stress Proof 2" I.D. 1144 Stress Proof 2" I.D. 1144 Stress Proof 2" I.D. 1144 Stress Proof
Hydraulic System Specs
  20 YD 22 YD 24 YD 29 YD 31 YD
Tank Capacity 70 Gal 70 Gal 70 Gal 70 Gal 70 Gal
Oil Flow Rate Body 20 gpm @ 750rpm 20 gpm @ 750rpm 20 gpm @ 750rpm 20 gpm @ 750rpm 20 gpm @ 750rpm
Oil Flow Rate Arm 18 gpm @ 750rpm 18 gpm @ 750rpm 18 gpm @ 750rpm 18 gpm @ 750rpm 18 gpm @ 750rpm
Filter Spin-on 10 Micron Spin-on 10 Micron Spin-on 10 Micron Spin-on 10 Micron Spin-on 10 Micron
Hoses 4-To-1 Burst 4-To-1 Burst 4-To-1 Burst 4-To-1 Burst 4-To-1 Burst
Operating Pressure Body 2,200 psi 2,500 psi 2,500 psi 3,000 psi 3,000 psi
Operating Pressure Arm 2,000 psi 2,000 psi 2,000 psi 2,000 psi 2,000 psi

Standard Equipment

  • Pack-on-the-go
  • Twin 14.5" x 8.25" clean-out doors
  • Chrome cylinder rods
  • Side-access door to hopper
  • Nitro carbonite single hoist cylinder
  • Sight gauge on reservoir tank
  • Tailgate ajar alarm
  • Dupont IMRON Elite paint (white)
  • Talamar Extreme™ hydraulic fluid
  • Rear vision camera system
  • Reinforced, frame-mounted arm
  • In-line heavy duty grippers
  • Sealed roller bearings on packer panel
  • Ergonomic in-cab control panel and joystick
  • Smooth body sidewall design
  • Positive automatic tailgate lock
  • Back-up alarm
  • Body ajar alarm
  • Hour meter
  • "Arm Stowed" indicator
  • LED lights
  • ANSI 245 compliant ≥ 245.1-2008
  • Multi-cycle pack

Optional Equipment

  • Hydraulic Hopper Cover
  • 300 gallon gripper
  • Camera options
  • Additional arm controls
  • Hopper ladder
  • Color paint
  • Broom/Shovel Racks
  • Arm cycle counter
  • CNG Powered