Mamba™ Satellite Side Loader

The New Way Mamba slithers its way into routes other trucks can’t and still delivers a menacing bite. With its slender body construction, the Mamba plays a big role and has the ability to transfer compacted materials to larger Rear Loaders. Available in fixed body mount, The Mamba also features cart tipper and barrel dumper options sure to strike fear into the competition.

The Mamba Satellite Packer

  • General Specs
  • Hydraulic Cylinder Specs
  • Chassis Min Requirements
General Specifications (standard)
Model
HB 600
HB 800
HB 1000
Body Capacity
6 yd
8 yd
10 yd
Hopper Capacity
1.5 yd³
1.5 yd³
1.5 yd³
Body Width (inside)
60"
60"
60"
Body Width (outside) (A)
94"
94"
94"
Body Length (B)
138"
165"
188"
Body Height (C)
80"
80"
80"
Overall Body Height (tailgate raised)
125"
125"
125"
Approx. Body Weight *
 (Empty & Exclusive of Options)
4,560 lbs.
5,350 lbs.
6,050 lbs.
Average Compaction
600-800 lb./yd
600-800 lb./yd
600-800 lb./yd
Hydraulic Cylinder Specifications (standard)
Model
HB 600
HB 800
HB 1000
Ejection Panel (1)
4-Stage Telescopic
6.5"; 81" Stroke
6.5"; 114" Stroke
6.5"; 138" Stroke
Tailgate Cylinders (2)
2.5" X 56" X 1.5"
2.5" X 56" X 1.5"
2.5" X 56" X 1.5"
Body Lift Cylinders (2)
3.5" X 14" X 1.75"
3.5" X 14" X 1.75"
3.5" X 14" X 1.75"
Chassis Minimum Requirements (standard)
Model
HB 600
HB 800
HB 1000
Total GVWR **
14,250 lbs.
18,000 lbs.
20,700 lbs.
Cab to Trunion
84"
108"
133"

‡ - Length measured depends on options ordered
* - Approximate Body Weight empty and exclusive of options
** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)

Mamba Technical Drawing

Mamba Body Construction


Body Specs
Main Body Rails C6 x 8.2# Channel  
Hopper Floor All Models - 1/4" 50K  
Body Floor HB800, HB1000, 7 Ga. A36
Floor Braces 3/16" x 2" x 6" A500B Tube
Mounting Brackets Formed 1/4" A36 Plate  
Ejection Panel Tracks C6 x 8.2# Channel  
Body Side Walls Lower 10 Ga.;
Upper 12 Ga. 		50K; A569
Roof 12 Ga. A569
Rear Frame Top & Sides 1/4" x 3" x 3" A500B Tube
Rear Frame Lower 1/4" x 3" x 3" A500B Tube
Tailgate Hinge Lugs 1/2" A36
Access Door 11" x 34" Door Size  
Tailgate Specs
Tailgate 10 GA AR235 GR
Tailgate Capacity 1/2yd³  
Tailgate Inside Height 84"  
Tailgate Inside Width 60"  
Tailgate Hopper Bubble 10 Ga. 50K  
Tailgate Sides 10 Ga. 50K  
Tailgate Seal Height 21"  
Tailgate Hinge Lugs 1/2" A36
Ejection Panel Specs
Base & Support Structure Formed 1/4" A36
Bottom Face Sheet Formed 3/8" A36 Plate
Shoes/Wear Pads (2) 1/4" x 5 3/4" x 24" UHMW
Cylinder Supports 3/4" A36 Plate
Cylinder Pin (1) 1/4" I.D. 1144 Stress proof  
Hydraulic System Specs
Operating Pressure 1,800 PSI 12,410 KPA
Min. Accept. Oil Flow 17 GPM 64 LPM
Pump Flow 20 GPM 75 LPM
Tank Capacity 24gal with 100 Mesh 141 micron suction strainer 91 L
Packer Cycle Time 19 sec  
Hydraulic Hoses 4 to 1 burst  
Filter 10 micron  
Engine RPM 1,275 - 1,550  

Standard Equipment

  • Auto-Lock Tailgate
  • Back Up Alarm
  • LED LIghts
  • Manual Packing Controls
  • Sight Gauge on Oil Tank
  • Pressure Gauge
  • Prime Paint
  • Chrome Cylinders
  • Tailgate Ajar Indicator

Optional Equipment

  • Accelerator Kit
  • Automatic Cycling
  • Finish Paint - Imron 5000
  • 2 Wheel Cart Tipper
  • 55 Gal Barrel Lift
  • PTO & Pump
  • Special Lighting
  • Rear Vision Camera System